Cuda Parts Washers in Memphis
Keep your parts squeaky clean with Hotsy equipment!
Hotsy of Memphis provides clean, environmentally friendly, automatic aqueous parts washers that can handle tough cleaning jobs. Parts washers are versatile pieces of equipment that are a fantastic addition to your operation, allowing you to clean your tools and parts, while leaving workers free to work on other tasks, greatly increasing efficiency.
The advantages of an automatic parts washer
Hotsy of Memphis is an authorized dealer for Cuda cabinet style parts washers, which are industrial-sized aqueous washers that use powerful spray jets of pressurized hot water to clean parts automatically. Combined with specially formulated detergents, you’ll not only clean faster, but you can protect the parts you’re washing with rust inhibitors.
One of the best things about a Cuda parts washer is they use no solvents! By using an aqueous parts washer, you won’t have to worry about health hazards and the long-term effects on your staff if they are currently hand scrubbing with toxic and troublesome solvents. Plus you won’t have the hassle of disposing of these solvents. Front Load Parts Washers Features include removable debris screen, automatic low-water shutoff, disc oil skimmer, convenient access to the sump and easy-to-reach controls for the oil skimmer, heater and wash-cycle timers and turntable on/off switch.
(All products shown below cannot be purchased online. Please fill out quote form here)
Cuda 2412 Top-Load Automatic Parts Washer
Cuda’s 2412 series of parts washers is an attractive entry-level top-load aqueous parts washer. At only 35 inches wide, the Cuda 2412 Series parts washer has a 250-lb. load capacity, and a 24 inch turntable diameter. While boasting Cuda Series durability, it has a 1/2 HP mechanical seal with flush tube style pump and an upper drive arm that rotates the turntable. The 115V models make the 2412 especially versatile for use anywhere in the shop.
Close Coupled Sealed Pump: 1/2 HP / 20 GPM / 22 PSI
250 Lbs. Load Capacity, determined with even weight distribution
25 Gal. Sump Capacity
4.5 kW Heater / 1.8 kW Heater for 115V model
Automatic Oil Skimmer
Low Water Shutdown
Casters
Machine: 41″L x 35″W x 45″H
Shipping: 55″L x 48″W x 58″H
Cuda 2216 Top-Load Automatic Parts Washer
The 2216 Series is a compact top-load automatic, aqueous parts washer with a 22″ turntable and 16″ work height that fits most commercial applications. It features a 1 HP mechanical seal with flush tube style pump.
Close Coupled Sealed Pump: 1 HP / 28 GPM / 30 PSI
500 Lbs. Load Capacity, determined with even weight distribution
23 Gal. Sump Capacity
4.5 kW Heater / 1.8 kW Heater for 115V model
Automatic Oil Skimmer
Low Water Shutdown
Casters
Machine: 42″L x 32″W x 52″H
Shipping: 54″L x 48″W x 59″H
Cuda 2518 Top-Load Automatic Parts Washer
The 2518 Series is at the top of our line with ruggedness and automation throughout. It comes standard with a time-tested chain drive assembly, virtually maintenance-free vertical seal-less pump, and disc oil skimmer that can be automated for convenience in disposing of oil. Extra-easy access to the sump and removable debris screen set it apart from other top-loaders on the market.
Vertical / Seal-less Pump: 3 HP / 50 GPM / 45 PSI
500 Lbs. Load Capacity, determined with even weight distribution
50 Gal. Sump Capacity
6 kW Heater
Automatic Oil Skimmer
Low Water Shutdown
Machine: 51″L x 40″W x 50″H
Shipping: 66″L x 57″W x 59″H
Cuda’s 7248 features a large 72-inch turntable diameter, allowing users to clean a wide range of industrial components. Its working height stands at 48-inches, and it boasts a load capacity of 5000 lbs. The 7248 series is equipped with a 7.5 HP vertical seal-less pump producing 160 GPM at 45 PSI, and has a 200- gallon sump capacity. A variety of industries can benefit from a 72-inch diameter parts washer including oil and gas, heavy equipment industry (CAT), railroads, and large manufacturing.
Vertical / Seal-less Pump: 7.5 HP / 160 GPM / 45 PSI
5,000 Lbs. Load Capacity, determined with even weight distribution
200 Gal. Sump Capacity
(2) 9 kW Heaters
Automatic Oil Skimmer
Low Water Shutdown
Roll-In Door
Push Button Table Jog
Rear Forklift Extension Pockets protect electrical equipment
Stainless Steel Sump Access Door
Machine: 100″L x 85″W x 100″H
The Cuda 4860 features a turntable diameter of 48-inches, working
height of 60-inches, and load capacity of 5000 lbs. The 4860 Series
is equipped with a 7.5 HP vertical seal-less pump producing 200 GPM
at 50 PSI, and has a 156-gallon sump capacity.
Vertical / Seal-less Pump: 7.5 HP / 200 GPM / 50 PSI
5,000 Lbs. Load Capacity, determined with even weight distribution
156 Gal. Sump Capacity
(2) 9 kW Heaters
Automatic Oil Skimmer
Low Water Shutdown
Optional 12″ Height Extension
Machine: 75″L x 66″W x 105″H
The Cuda 3648 features a turntable diameter of 36-inches, working height of 48-inches, and load capacity of 2500 lbs. The 3648 Series is equipped with a 7.5 HP vertical seal-less pump producing 150 GPM at 50 PSI, and has a 113-gallon sump capacity. It also includes upgraded features such as a more durable control panel, easier to replace handle, stainless steel sump covers, and external plumbing making it the easiest to maintain Cuda yet
Vertical / Seal-less Pump: 7.5 HP / 150 GPM / 50 PSI
2,500 Lbs. Load Capacity, determined with even weight distribution
113 Gal. Sump Capacity
(2) 9 kW Heaters
Automatic Oil Skimmer
Low Water Shutdown
Machine: 57″L x 49″W x 94″H
Shipping: 63″L x 76″W x 100″H
The Cuda 2530 is the smallest in the front-load automatic parts washer models and is smaller than many solvent tanks. Featuring a turntable diameter of 25-inches, working height of 30-inches, and load capacity of 500 lbs. The 2530 Series is equipped with a 3 HP vertical seal-less pump producing 50 GPM at 45 PSI. The Cuda 2530 front load aqueous parts washer is used in many applications from automotive, trucking, amusement parks to ski areas.
Vertical / Seal-less Pump: 3 HP / 50 GPM / 45 PSI
500 Lbs. Load Capacity, determined with even weight distribution
40 Gal. Sump Capacity
6 kW Heater
Automatic Oil Skimmer
Low Water Shutdown
Machine: 48″L x 45″W x 74″H
Shipping: 66″L x 57″W x 79″H
The Cuda 2840 is the next larger size in the front-load automatic parts washer models. The 2840 features a turntable diameter of 28-inches, working height of 40-inches, and load capacity of 1000 lbs. The 2840 Series is equipped with a 3 HP vertical seal-less pump producing 50 GPM at 45 PSI.
Vertical / Seal-less Pump: 3 HP / 50 GPM / 45 PSI
1,000 Lbs. Load Capacity, determined with even weight distribution
50 Gal. Sump Capacity
6 kW Heater
Automatic Oil Skimmer
Low Water Shutdown
Machine: 51″L x 50″W x 80″H
Shipping: 66″L x 57″W x 95″H
The Cuda 2848 features a turntable diameter of 28-inches, working height of 48-inches, and load capacity of 1000 lbs. The 2848 Series is equipped with a 5 HP vertical seal-less pump producing 110 GPM at 50 PSI.
Vertical / Seal-less Pump: 5 HP / 110 GPM / 50 PSI
1,000 Lbs. Load Capacity, determined with even weight distribution
50 Gal. Sump Capacity
9 kW Heater
Automatic Oil Skimmer
Low Water Shutdown
Machine: 51″L x 50″W x 88″H
Shipping: 66″L x 57″W x 95″H